Overview
Hammerite have specially formulated their direct to rust paints to perform as a primer, undercoat and topcoat in one. Available in a handy aerosol can to offer quick and easy application on metal surfaces such as doors, garden furniture, gates and railings to name a few. This smooth finish spray paint can be applied directly to rust and dries quickly to a flawless high sheen finish. Hammerite Direct to Rust Smooth Aerosol Spray Paint is available in a range of colours including Dark Green, Gold, Black and Blue.
- Up to 8 years rust protection
- Ultra tough - excellent weather resistance
- Smooth glossy finish
- Available in a range of colours
- Spray for quick and easy application
Area | Exterior |
Recommended Use | Metal Surfaces |
Base | Solvent based |
Coverage | 400ml covers up to 0.5m² |
Drying Time | Touch dry 1-2 hours |
Re-Coat Time | 4 hours |
Recommended Coats | 3 or 4 coats |
Application Method | Aerosol |
VOC Levels | Very High |
Preparation
Always ensure the surface to be treated is clean, dry and free from any dust, dirt, grease, flaking paint or rust.
- Remove any loose paint and debris with a wire brush.
- Remove dirt and dust with diluted detergent.
- Remove grease with , then rinse with clean water and allow to dry.
- On bare zinc, aluminium and galvanised surfaces, firstly apply .
Application
Before applying test a small area to ensure you are happy with colour and adhesion.
- Spray a test patch of Hammerite Direct to Rust Smooth Aerosol Spray Paint onto previously painted surfaces and leave for 1 hour.
- If there is no reaction apply Hammerite Direct to Rust Metal Paint directly to surface.
- If there is a reaction remove all paint before applying Hammerite Direct to Rust Metal Paint.
- For best results store the aerosol at room temperature for two hours prior to use.
- Shake the aerosol can vigorously in a vertical motion, until the agitator ball is heard and continue to shake for a further 3 minutes.
- Spray in light even strokes from a distance of 15cm to avoid runs.
- Do not concentrate spray on one spot.
- Apply at least 3-4 coats for maximum protection.
- Allow 15 minutes between coats .
- Between coats invert can and spray for 2 seconds to avoid blockages.
- Touch dry 15 minutes.
- Recoat after 15 minutes.
Note: Always follow the manufacturer instructions found on the tin.